| Project by tmiller | posted 194 days ago | 1160 views | 4 times favorited | 3 comments |  |
 |
I mount my drill press and miter saw on the side of my workbench. They are basically concealed under the overhang of the table top. Admittedly the drill press is a little awkward to hang upside down but it does get it out of the way. L-brackets are made from 3/4” ply. I realize this is slightly specific to my workbench but some adaptation could be made I’m sure. Having the drill press and miter saw mounted on 3/4” ply is nice because it makes it easy to C-clamp them to the bench top or elsewhere.
-- All trees have projects inside of them, it is your job to get them out.
3 comments so far
spaids
home | projects | blog
460 posts in 588 days
posted 194 days ago
SLICK! It took me a minute to figure out what was going on with that drill press. Those are great ideas.
-- Wipe the blood stains from your blade before coming in.
lew
home | projects | blog
4486 posts in 650 days
posted 194 days ago
Cool!!
Great way to utilize some wasted place in a small shop! Thanks
a1Jim
home | projects | blog
16776 posts in 472 days
posted 194 days ago
Good thinking well done
-- Jim from Heirloom Woodshop Southern Oregon