LumberJocks

Incra jig fence and router table extension

  • Advertise with us
Project by Tim Royal posted 07-13-2015 03:01 AM 2286 views 1 time favorited 0 comments Add to Favorites Watch

I have been thinking about this project for some time as a part of my table saw station build which is so far from done that I will have to blog it so I can laugh at myself. I am on a tight budget so I collect scraps and fabricate as I go. This means that I often have to be creative with my solutions. The extension top is an old laminated table that i cut up for the purpose and edge banded with some milled pallet runners. I epoxied the bolts in which hold it to the cast iron top.

The sacrificial table saw fence design is a big part of this build since the macro adjustment of the router fence is my Vega fence on the table saw. I also designed it to add panel raising and Tenon jigs to the saw later and to use the incra’s adjustability with the saw add well. This also means that in addition to the 1/32 adjustment of the incra jig I also have the infinite micro adjustment of my Vega thumbwheel.

Later i will add t- track and locking knobs to either end of the fence… I can add pics later if anyone’s interested. Btw… Rockler had the incra on sale… Only way it fit my budget.

-- -Tim Royal... Always reminded of this when I see the amazing work LJ's do (I have no choice but to be humble!), "Pride makes us artificial and humility makes us real." -Thomas Merton





0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com