LumberJocks

Closet Remodel

  • Advertise with us
Project by Jim Savage posted 07-05-2015 10:58 AM 806 views 0 times favorited 0 comments Add to Favorites Watch

This closet had a single bar and shelf running from side to side. My daughter wanted more hanging space and shelving and this is the design she suggested.

Construction is 6 plywood boxes made with butt joints glued and screwed together. I used 1/4-inch strips of poplar to cover the plywood edges on the front and 1/4-inch plywood for the back of each box. The boxes were then painted, stacked in place and attached to each other and the back wall with a few screws.

The hanging bar was purchased at Home Depot. Total materials for the whole project were about $175.





0 comments so far

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com