LumberJocks

T.V. Stand

  • Advertise with us
Project by Russ Anderson posted 04-18-2009 05:30 AM 1353 views 1 time favorited 1 comment Add to Favorites Watch

I had these great leg quarters left from the cabinet shop that I used to work for, so I decided to put them to good use. I compiled the scrap woods that I had, ranging from alder to oak and even some paint grade plywood, and turned it into this T.V. stand. Once it was built and sanded, I distressed it using a hammer, screws, nails and various other tools. When that was done, I sprayed it with two coats of a dark red lacquer. Once the red was dry I coated it with one coat of black lacquer. While the black was still soft, I began scraping it off in places to allow the red to show through. Once the whole thing was cured, I went over it with steel wool to dull the finish and help make it look older.

The SketchUp image shows the profiles better.

-- Russ





1 comment so far

View a1Jim's profile

a1Jim

112933 posts in 2328 days


#1 posted 04-18-2009 05:44 PM

Hey Russ great entertainment center. Most unique finish.

-- http://artisticwoodstudio.com Custom furniture

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase