Poker table with a top

  • Advertise with us
Project by kid302 posted 06-21-2015 11:00 PM 1071 views 0 times favorited 3 comments Add to Favorites Watch

Ok so the table is the same as always 1” thick crown under lip, 50×75ish. 8” Peds and 6 lion feet (#104)
The question is how to do the top and keep it from marking the table or fabric….. The top had to have cleats across it to keep it straight and that added depth so I used blocks in each cup holder that in height keeps the cleats from hitting fabric and the underside of top touching the frame of poker table
Yes it does add height to the finished table top overall but is not enough to make it not Functionable Added a basic skirt to the top that looked to blend in with the crown when top was in place

3 comments so far

View Ken90712's profile


17614 posts in 3424 days

#1 posted 06-21-2015 11:59 PM

Awesome job little brother. Great to see your work and keep the family woodworking tradition going. We need to get Dad on here now Lol Happy father’s day as well.

-- Ken, "Everyday above ground is a good day!"

View Sasha's profile


958 posts in 1448 days

#2 posted 06-28-2015 01:37 PM

Table very beautiful, only table-top very thick. It isn’t convenient to sit at such table – you won’t throw a foot on a foot. But this my opinion…..

-- Ganchik Sasha. Life is not a draft, tomorrow you will not redo......

View kid302's profile


24 posts in 3232 days

#3 posted 06-29-2015 05:32 AM

Yes is sits a bit higher but we talked about that before built for the customer. If that’s what you mean by thick… And for the record I do use adj. feet on the feet of table, so I guess I do throw a foot on a foot.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics