|Project by Sasha||posted 06-18-2015 05:10 PM||1210 views||1 time favorited||7 comments|
Day Кind. Friends, I want to tell you how to cut a tree an electric string (thread). I didn’t meet here.
1. The lowering electric transformer on 36 volts is necessary.
2. 2 pieces of a soft electric wire on 2 meters.
3. By the ends of a wire self-made clips – a metal plate (2-15 – 150 mm) with 2 openings with a carving diameter 4 fasten. And 4 screws on 4 mm
4. Between clips 1 meter a tungsten thread (the stretched electric spiral) fastens. The thread on 36 volts heats up to a red state and to cut. If to cut vertically, not heavy freight (not the big bearing) fastens. If to cut horizontally or under an inclination – both hands (in left – in the right). If the beginning is necessary broken or arc, on corners or on an arch to stick on 2 mm thin nails.
PRIIMUShchESTVO – (opportunities aren’t limited, the Flight of fancy) –
1. To cut out fine details (a fret saw or a tape saw not conveniently and not favourably).
2. It isn’t necessary to grind the cut-off end face. Ready Muaristy drawing and painted black color.
If, something isn’t is clear I will send video
or photo. Good luck.
The last photo – 30 years.
-- Ganchik Sasha