My Incra Router Table

  • Advertise with us
Project by Fired_Yo_Momma posted 06-10-2015 02:37 AM 2517 views 1 time favorited 7 comments Add to Favorites Watch

Well I picked up this Incra Router table on CL and after spending some time to do some research on what to do with the empty space I decided to build this. This was my first real big project and I took my ideas from numerous people here on lumber jocks. I got a lot of great ideas from the Lance guy that has his Incra Router table on here. I wanted to be a bit different so I put some inlay decor on the drawer face’s. This was made from baltic Birch phy and walnut. I really like working with walnut. It really can pop once a finish is on it. The fence I bought brand new from Incra and everyday that I play with it I learn something new.

I am a 42 year old newbie who has not been involved with woodworking since high school. This took me little over two months but because the fence to 5 weeks to get in. I am really impressed with the Incra system.

7 comments so far

View Scott Oldre's profile

Scott Oldre

1078 posts in 3603 days

#1 posted 06-10-2015 12:13 PM

You just can’t beat Incra tools/equipment. I have the TS-LS32 on the table saw with all the Wonderfence extras, have a Miter sled from them that I use with my 1000SE miter fence, and various measuring stuff. I’d buy it all if I could. Woodpecker’s and Incra have a great thing going on.


-- Scott, Irmo SC

View CB_Cohick's profile


487 posts in 1422 days

#2 posted 06-10-2015 02:17 PM

Those drawer faces look great. How wide is your cabinet? The orientation is at a right angle compared to the table I built myself, so I’m curious about how much table you have on either side of your router bit.

-- Chris - Would work, but I'm too busy reading about woodwork.

View bobasaurus's profile


3539 posts in 3355 days

#3 posted 06-10-2015 09:26 PM

That’s quite the router cabinet, nice job.

-- Allen, Colorado (Instagram @bobasaurus_woodworking)

View Fired_Yo_Momma's profile


79 posts in 1584 days

#4 posted 06-10-2015 09:40 PM

Yea I love the Incra stuff if I had unlimited funds I would get all there stuff as well. I really am enjoying the Jessem Router Stock guides. You really don’t need the featherboard with these in place.

CB I will get you an exact measurement tommorow.

Thanks guys

View Fired_Yo_Momma's profile


79 posts in 1584 days

#5 posted 06-11-2015 06:14 AM

That s quite the router cabinet, nice job.

- bobasaurus

Thanks Allen, I see your an HW Engineer. I am a RF Engineer.

View timbertailor's profile


1594 posts in 1595 days

#6 posted 06-11-2015 01:04 PM

The table is 27” wide, so I am guessing around 13” on either side.

Gotta love this router table set up. The work you did on the drawers looks great.

You are going to love this set up. Incra rocks!!

-- Brad, Texas,

View Ken90712's profile


17592 posts in 3360 days

#7 posted 05-11-2016 03:37 PM

Now that is a sweet set up! Great work.

-- Ken, "Everyday above ground is a good day!"

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics