|Project by miles125||posted 06-10-2007 03:09 PM||1506 views||1 time favorited||12 comments|
This is a little twist i did on a decorative laminate pedestal. I basically built the plywood box then jigsawed out an area to insert two 3/4” thick mahogany pcs mitered at the corner. I drew the shape i wanted & started hogging it out freehand with a core box bit in a formica router, eventually getting down to a dremel tool and hand sanding. Then the laminate was fitted around the shape.
-- "The way to make a small fortune in woodworking- start with a large one"