| Project by Dan Hux | posted 1506 days ago | 731 views | 0 times favorited | 4 comments | ![]() |
![]() |
This is my first time building a real piece of furniture. It’s an oak console/hall table. I’m learning to build furniture in my spare time. It mostly mortise and tenon. The only screws are holding the table top down. Oddly enough, the only problems I had were with the finish.
-- Dan Hux,,,,Raleigh, NC http://whitdaniel.com
| Pin It |




























4 comments so far
CharlieM1958
home | projects | blog
14856 posts in 2386 days
#1 posted 1506 days ago
Nicely done! Yeah….finishing is often the hardest part.
-- Charlie M. "Woodworking - patience = firewood"
interpim
home | projects | blog
1115 posts in 1626 days
#2 posted 1506 days ago
Awesome looking table… a little constructive criticism though, Usually you want you side aprons to come down as far as the front/back aprons. This will give a uniform appearance to the table. I think you did a great job with the finish.
-- San Diego, CA
Dan Hux
home | projects | blog
524 posts in 1542 days
#3 posted 1505 days ago
yea,,I realized that after I got started. I’m working on 2 side tables now, not making that same mistake or a whole bunch more I made the first time. I should be learning on pine, but I like using oak..
-- Dan Hux,,,,Raleigh, NC http://whitdaniel.com
a1Jim
home | projects | blog
87110 posts in 1745 days
#4 posted 1505 days ago
a good first project.
-- W James Brokenbourgh Custom furniture maker http://artisticwoodstudio.com/
Have your say...