Project by RustedRain | posted 06-01-2015 03:18 PM | 1519 views | 1 time favorited | 2 comments | ![]() |
![]() |
I really hadn’t planned on building a lumber rack for a while, but when somebody gives you about 250 board feet of walnut, what are you gonna do? The base of the vertical storage is made of an old waterbed frame i had saved (yea, had that a while), and the braces are made from galvanized pipe that the guy at the BORG cut & threaded. I do have a few boards that are too long for the rack, so I borrowed the design for the horizontal portion from Lumberjock Paul. While I was at it, I figured i might as well finish the moulding around the door frame as well.
-- RR
2 comments so far
Andre
home | projects | blog
1786 posts in 1773 days
#1 posted 06-01-2015 06:15 PM
Looks great, another thing on my to do list! sure hope them tools are attached good above the door, if anyone of them came down OUCH!
-- Lifting one end of the plank.
whitebeast88
home | projects | blog
4128 posts in 2157 days
#2 posted 06-01-2015 10:33 PM
Great lumber rack.
-- Marty.Athens,AL
Have your say...