Cherry Cutting Board

  • Advertise with us
Project by Jim B posted 05-31-2015 08:29 PM 1023 views 0 times favorited 1 comment Add to Favorites Watch

I sold the first cutting board I made and the guy who bought it said he would be interested in something smaller too. This is what I came up with, nothing fancy just cherry strips laminated together with Titebond III then run through the planer. Since it is so short I left the two outer strips 20” long so I could safely plane it then trimmed them after. Finished with Howards Cutting Board Oil.

1 comment so far

View ohwoodeye's profile


2106 posts in 3356 days

#1 posted 06-01-2015 01:40 PM

Half way there. Really need to cut again and rotate strips to make it an end grain cutting board. Otherwise they just won’t hold up.

-- Directions are just the Manufacturer's "opinion" on how something should be assembled. ----Mike, Waukesha, WI

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics