Making wooden pipes

  • Advertise with us
Project by Jack Houweling posted 05-24-2015 10:02 PM 1827 views 2 times favorited 4 comments Add to Favorites Watch

Wood pipes can be made with minimal tools. These pipes are made with just a Jigsaw, drill and drill press.
You will also need some glue, clamps, hole saws, nuts and a threaded rod.

To build I glued a few blocks together and used a hole saw to remove the center. Next I stacked the pieces
and clamped them giving me a 1 foot pipe.

After drilling out the center of the first piece I was able to make a second smaller one.
In the video I show how I use a big sanding board I made for the project. I now have accurate and smooth pipes.

Check out the video!

-- Jack, Delta B.C.

4 comments so far

View htl's profile


4230 posts in 1358 days

#1 posted 05-25-2015 03:28 AM

Now that’s different.
Going to make some of these.
I’ve got just the project for some wood pipe.
Thanks Jaxdesign

-- An Index Of My Model making Blogs

View Jack Houweling's profile

Jack Houweling

110 posts in 1402 days

#2 posted 05-25-2015 05:03 AM

htl, very easy to make, good luck with your project. Let us know how it goes!

-- Jack, Delta B.C.

View htl's profile


4230 posts in 1358 days

#3 posted 05-25-2015 03:46 PM

Been thinking of building a bigger wood cyclone some wood pipes would go nicely with that.
Here’s my first one.

-- An Index Of My Model making Blogs

View majuvla's profile


13353 posts in 3066 days

#4 posted 05-26-2015 04:01 PM

Very useful presentation. Who never needed wooden pipes sometimes.

-- Ivan, Croatia, Wooddicted

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics