LumberJocks

hollow form #2

  • Advertise with us
Project by wood_maestro posted 05-19-2015 08:30 PM 557 views 0 times favorited 1 comment Add to Favorites Watch

This Hollow Form was turned from white Ash. After turning, the piece was dyed with black, and blue transparent dyes and finished with 4 coats of lacquer. When the finish was completely dried, it was buffed and waxed . I applied the dyes using LJ Trifern’s method with the exception of adding couple of layers of Dewaxed Shellac before the lacquer application. The cap is threaded on to the base for safe keeping of the content. The threads are made from brass and can be removed from and put on the base with ease for as many times as desired without damaging the threads.
Approximate Dimensions:
6 7/8 in. high x 4 3/8 in. largest diameter x 2 in. diameter at the top x 1 3/4 in. diameter at the base.

-- wood maestro....... Be Well, Do good work, and Stay in touch





1 comment so far

View Ronald G Campbell 's profile

Ronald G Campbell

891 posts in 1469 days


#1 posted 05-19-2015 09:00 PM

Well Done

-- Ron Campbell https://www.facebook.com/ronald.g.campbell

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com