LumberJocks

hanging some antique doors

  • Advertise with us
Project by dan mosheim posted 05-19-2015 01:16 AM 909 views 1 time favorited 8 comments Add to Favorites Watch

another challenging one here .. we came on board after the hole was already framed, and it turned out that the doors were too short and too wide, and the hinges were in the middle of the door ‘sandwhich’ ... ‘houston, we have a problem.’ lots of steps to get from start to finish and you can read all about it on this blog post.

-- dan,vermont,http://dorsetcustomfurniture.blogspot.com/





8 comments so far

View DocSavage45's profile

DocSavage45

8179 posts in 2536 days


#1 posted 05-19-2015 01:58 AM

Dan,

You really get some interesting challenges! Nice save!

-- Cau Haus Designs, Thomas J. Tieffenbacher

View lightweightladylefty's profile

lightweightladylefty

3186 posts in 3406 days


#2 posted 05-19-2015 03:16 AM

Dan,

This looks like quite a formidable task, but you were up to the challenge!

L/W

-- Jesus is the ONLY reason for ANY season.

View MikeSpanky's profile

MikeSpanky

178 posts in 1056 days


#3 posted 05-19-2015 03:26 AM

Dan looks like you pulled it off though. Great job.

-- There's no crying in woodworking. Just measure and cut again.

View Jim Jakosh's profile

Jim Jakosh

18699 posts in 2799 days


#4 posted 05-19-2015 11:55 AM

Quite a challenge, but you did it well. Nice engineering and nice finish work!!

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View grizzman's profile

grizzman

7836 posts in 2997 days


#5 posted 05-19-2015 04:54 PM

yep i looked the who blog over and you sure did have a job here, but i have followed you for some time and you have always come through with a solution, and you didn’t disappoint here, those are some honking doors, i think a tank could roll over them…great job dan, and your other workers as well.

-- GRIZZMAN ...[''''']

View Ted's profile

Ted

2808 posts in 1904 days


#6 posted 05-19-2015 11:28 PM

Those doors are absolutely fantastic!

-- The first cordless tool was a stick. The first power tool was a rock.

View Mean_Dean's profile

Mean_Dean

5523 posts in 2841 days


#7 posted 05-19-2015 11:37 PM

Looks like they turned out great!

-- Dean -- "Don't give up the ship -- fight her 'till she sinks!" Capt James Lawrence USN

View dan mosheim's profile

dan mosheim

240 posts in 3382 days


#8 posted 05-20-2015 10:50 AM

thanks for your comments. it was a fun project .. we do get some challenging ones. have a good memorial day weekend! it’s open studio here , 10 to 5, saturday and sunday. (23rd and 24th)

-- dan,vermont,http://dorsetcustomfurniture.blogspot.com/

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com