Horizontal slot mortiser

  • Advertise with us
Project by majuvla posted 05-11-2015 06:26 PM 4065 views 25 times favorited 35 comments Add to Favorites Watch

Finaly finished, with all it’s features and accessories. Made of 18mm playwood and two types of metal drawer guides. All is moved by two handles and stops. There are several setups:

1. flexible 45-90 degree setup
2. fixed 45 degree setup
3. longitudinal setup
4. up to 30 degree tilted table
5. router’s plate can be moved up-down
6. all can be removed to be used as normal router table bellow.

-- Ivan, Croatia, Wooddicted

35 comments so far

View Dutchy's profile


1974 posts in 1589 days

#1 posted 05-11-2015 06:30 PM


-- My englisch is bad but how is your dutch?

View BusterB's profile


1910 posts in 1429 days

#2 posted 05-11-2015 06:36 PM

Dang that’s impressive….nice job!!!! Does it come with an instruction manual??

-- Buster, Ocoee TN (Critics are men who watch a battle from a high place then come down and shoot the survivors - Hemingway)

View Rockbuster's profile


499 posts in 2029 days

#3 posted 05-11-2015 06:48 PM

You have been a busy boy, very impressive, is it all your own design

-- Rockbuster,Ft. Wayne,In It is far better to remain silent, and appear the fool, than it is to open ones mouth, and remove all doubt.

View Roger's profile


19714 posts in 2225 days

#4 posted 05-11-2015 07:08 PM

Very nice Ivan. Looks like it’s very versatile.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed.

View doubleDD's profile


5062 posts in 1464 days

#5 posted 05-11-2015 07:18 PM

What a complex set up. I see you had on your thinking cap. Impressive.
All those wing nuts are making me dizzy.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View a1Jim's profile


115177 posts in 2998 days

#6 posted 05-11-2015 07:29 PM

Cool design,well done.

-- Custom furniture

View patron's profile


13524 posts in 2762 days

#7 posted 05-11-2015 07:29 PM

a very well done job ivan

super tool

you da man !

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View majuvla's profile


8712 posts in 2288 days

#8 posted 05-11-2015 08:04 PM

Thanks all, no special sketch up and design manual, all ideas came from many woodworkers from LJ and YOU TUBE.

-- Ivan, Croatia, Wooddicted

View AZMike's profile


14 posts in 1458 days

#9 posted 05-11-2015 08:04 PM

How do you minimize the lateral play in the metal drawer guides?

View Jim Sellers's profile

Jim Sellers

394 posts in 1756 days

#10 posted 05-11-2015 09:40 PM

Awesome machine Ivan. I had to look long and hard at this to see its capabilities. Well engineered and well built.

-- J.C.Sellers, Norcross, Ga. Just cut it right the first time. The best carpenters make the fewest chips.

View ZAGREB's profile


449 posts in 1071 days

#11 posted 05-11-2015 09:53 PM

ludnica stari moj,super stvar,vidi se da si se dooobro potrudio…sad su stolci za starce na redu?

-- bambi

View lcwood's profile


145 posts in 2185 days

#12 posted 05-11-2015 09:58 PM

really nice work
I like to ask for more photos but THIS one deserve a video

thanks for posting

View Mark55's profile


162 posts in 1484 days

#13 posted 05-12-2015 12:15 AM

Very nicely done, I always enjoy seeing shop built machinery.

-- Mark, Newton, NC.

View madts's profile


1662 posts in 1761 days

#14 posted 05-12-2015 12:18 AM

Looks like it can do everything but make bread.
Good job.


-- Thor and Odin are still the greatest of Gods.

View jumbojack's profile


1666 posts in 2045 days

#15 posted 05-12-2015 12:30 AM

just WOW!

-- Made in America, with American made tools....Shopsmith

showing 1 through 15 of 35 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics