|Project by GlassImpressions||posted 05-10-2015 10:19 PM||1729 views||9 times favorited||6 comments|
I documented this build on my YouTube channel: https://youtu.be/MBMcwHkRNCY
Watches should be displayed, not stored. I have 4 watches so far in my relatively short life and needed a solution to get them off of the pegs on my closet wall. I made this watch box out of cherry
I used a dovetail style drawer lock joint to construct the display case. I turned the little knob on my mini lathe and purchased some antique finish hinges.
As every project teaches you something, this project was no different. I learned a few things for the next one I will build. The hinges I purchased were typical quality you would expect from a standard hinge. The watch box that was build was worth of much higher quality. Next time, I will go with Brusso hinges.
If you watch the video, I do not have a stopping mechanism for the lid. A chain or even a small nice looking stop on the back would suffice. But this problem can be solved with upgraded hinges as well.
If you have any questions please leave a comment below, message me on my website, or leave a comment on YouTube.
-- Glass Impressions. Please check out my YouTube Channel! https://www.youtube.com/channel/UCSltwX_J9s-YH9tK3Qc4QUw