Clamp Cart

  • Advertise with us
Project by whope posted 05-10-2015 11:52 AM 1905 views 24 times favorited 11 comments Add to Favorites Watch

The string of shop improvements continues with a clamp rack from Woodsmith issue #137. No more clamps piled up in a corner or taking up valuable horizontal surfaces.

Oh, look, I have room for more clamps…

-- Measure it with a micrometer, mark it with chalk, cut it with an axe.

11 comments so far

View Diggerjacks's profile


2090 posts in 2562 days

#1 posted 05-10-2015 04:49 PM

Hello Whope

Nice clamp cart

I have to make on e but I have to buy clamps also I will wait …
I like the add to support the glu
Thanks for sharing

-- Diggerjack-France ---The only limit is the limit of the mind and the mind has no limit

View Hawaiilad's profile


2885 posts in 2444 days

#2 posted 05-10-2015 07:05 PM

Nice clamp rack. It’s time for me to build one. The last few years I have been adding more and more clamps and finding a place to hang them is a bit hard…thanks for sharing

-- Larry in Hawaii,

View timbertailor's profile


1591 posts in 848 days

#3 posted 05-10-2015 08:22 PM

Such a good use of space and its portable too! Its nice to be able to wheel them right up to your assembly table and go after it.

Nice job!

-- Brad, Texas,

View waho6o9's profile


7125 posts in 2000 days

#4 posted 05-10-2015 09:43 PM

Clamp rack on wheels with room for expansion great idea

and you can find the glue as well. Great job whope!

View WhattheChuck's profile


221 posts in 2984 days

#5 posted 05-10-2015 10:33 PM

Shows how dense I am. I just figured out why the glue is on the cart. :-)

-- Chuck, Pullman, WA

View whope's profile


137 posts in 1869 days

#6 posted 05-10-2015 10:37 PM

I may need to upgrade the wheels. It’s not hard to move right now., but if I add more clamps, it may get that way. :(

-- Measure it with a micrometer, mark it with chalk, cut it with an axe.

View Don K's profile

Don K

22 posts in 543 days

#7 posted 05-11-2015 06:43 AM

Great idea on incorporating the glue holder into a rolling clamp rack. Awesome!!!!

-- v/r, Don

View helluvawreck's profile


22707 posts in 2290 days

#8 posted 05-11-2015 01:20 PM

This is a great design for a clamp cart and you did a fine job on it. It will be a great addition to your shop.

helluvawreck aka Charles

-- If a man does not keep pace with his companions, perhaps it is because he hears a different drummer. Let him step to the music which he hears, however measured or far away. Henry David Thoreau

View McDade's profile


12 posts in 562 days

#9 posted 05-11-2015 01:30 PM

Thanks for sharing Whope, I now have one more project on my list. :)

View Richard's profile


1871 posts in 2114 days

#10 posted 05-11-2015 06:25 PM

Make it BIGGER and Buy More Clamps. Looks good.

View kennymac's profile


38 posts in 629 days

#11 posted 05-13-2015 11:44 PM

Wow, very nice. This site has so many talented people on it, I need to make one of these too!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics