SAWSTOP shop-made (height-adjustment free) outfeed table

  • Advertise with us
Project by ChuckM posted 05-09-2015 03:44 PM 2238 views 2 times favorited 4 comments Add to Favorites Watch

Made of scrap plywood board, 2×4, and a pair of butt hinges

The detachable legs rest on the mobile base—not on the floor—maintaining the level of the outfeed table to the saw table at all times. When not in use, the legs are tucked underneath the outfeed table for easy storage.

Alternative: Outfeed table from SawStop for about $120 Cdn (leg adjustments may be needed if the floor is not evenly flat—unless the tablesaw is positioned at the same spot all the time), like this:

-- The time I enjoy wasting is not time wasted

4 comments so far

View Hazem's profile


187 posts in 1485 days

#1 posted 05-10-2015 01:18 AM

Chuck, great project.

I just bought a Sawstop and put it in an aftermarket base today. The saw rocks within the base. The base itself is stable. The saw has no adjustable legs. How do i prevent saw from rocking?

View KarlB's profile


1 post in 2899 days

#2 posted 05-10-2015 03:53 AM

I have the saw stop mobile base and its rock solid. Try some shims or else return it and get the saw stop one.

Nice outfeed table.

View ChuckM's profile


615 posts in 3903 days

#3 posted 05-10-2015 01:23 PM

Karl is right. Shims should work, but if you can post a picture or two, better suggestions may be possible.
If yours is the professional model, the saw is some 400 pounds and I am not sure how mobile (one direction only?) the saw is on the after-market base. I upgraded mine to the base (conversion kit) intended for the industrial model and I can almost steer mine with one hand.

-- The time I enjoy wasting is not time wasted

View Mean_Dean's profile


6912 posts in 3384 days

#4 posted 05-12-2015 12:14 AM

Great shop project! I need to make one of these myself, and your project gives me lots of good ideas!

-- Dean -- "Don't give up the ship -- fight her 'till she sinks!" Capt James Lawrence USN

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics