Printer Stand

  • Advertise with us
Project by Jon Parker posted 1988 days ago 1572 views 1 time favorited 3 comments Add to Favorites Watch

My friend asked if I could build him a simple printer stand that had a bit more elegance than the plastic or cheap wood ones. This is what we came up with. It’s built from birch plywood and wrapped with hickory. Attached with 3 pocket screws on the inside of each leg. The back is open for printer cords. The shelf is adjustable by about every 1/2 inch on pegs. Stained with dark walnut and then sealed with polyurethane.

-- Jon | Rigby, Idaho

3 comments so far

View Beginningwoodworker's profile


13337 posts in 2299 days

#1 posted 1988 days ago

Nice printer.

-- CJIII Future cabinetmaker

View woodworm's profile


14124 posts in 2217 days

#2 posted 1988 days ago

Nice printer stand and with the paper shelf, it is so handy.

-- masrol, kuala lumpur, MY.

View gjd's profile


18326 posts in 2279 days

#3 posted 1988 days ago

This looks like a great printer stand, and, as you said, a lot better than reasonably priced alternatives.

-- gjd Southcentral Wisconsin

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

Latest Projects | Latest Blog Entries | Latest Forum Topics :: gardening showcase