LumberJocks Woodworking Forum banner

Project Information

I got some new carbide Burrs for my dremmel so I decided to carve and wood burn my YouTube channel name on some scrap oak to try them out,Its not the best carving in the world but it was fun to make!
Its my second power carving I found it very quick at removing material but it ran away from me once or twice but I was able to fix most mistakes I made,I think I would have done a neater job with my hand tools.I woodburned the letters and outer border before finishing.
I sanded the woodburned areas to 240 grit to give a vintage feel to the plaque and used a spray polyurethane lacquer to finish the carving. I made a YouTube video of the process Please thumbs up and subscribe!

Gallery

Comments

· Registered
Joined
·
1,038 Posts
Great sign.Nice work can't tell where you let it get away from you.thanks for sharing.
 

· Registered
Joined
·
375 Posts
Awesome sign! It is nice to see a video of your process.
 

· Registered
Joined
·
122 Posts
Excellent video presentation, nice project! I'm lucky to have such buddies to learn from.
 

· Registered
Joined
·
3 Posts
Thank you Marty Lee Todd and Ivan!!it was a really fun project!when I was doing the S it ran and cut away a piece of the letter,so when I wood burned I burnt the mark it left you wouldn't notice without looking very closely!!
 

· Registered
Joined
·
6,953 Posts
Wow! Nice crisp lettering!
 

· Registered
Joined
·
3 Posts
Thanks Lew and Charles!
 
Top