or Join Now!
Motawi Tile and Quartersawn oak. Dye and satin poly finish
home | projects | blog
485 posts in 2695 days
Preview this project card
arts and crafts
14 posts in 2739 days
#1 posted 03-11-2009 06:14 PM
I’ve been wanting to build a similar project, but the tiles are very expensive. Could you please let me know where you purchased your’s.
Your box turned out beautifully.
16219 posts in 3549 days
#2 posted 03-11-2009 06:21 PM
-- Charlie M. "Woodworking - patience = firewood"
3474 posts in 2858 days
#3 posted 03-11-2009 06:33 PM
I like it. Different. Cool design.
-- mtnwild (Jack), It's not what you see, it's how you see it.
27251 posts in 3153 days
#4 posted 03-11-2009 06:40 PM
This is a really nice box. I particularly like the lid design and had one of these on my to-do list but never could find the time for it.
Nice job on the build.
-- Challenges are what make life interesting; overcoming them is what makes life meaningful- Joshua Marine
14145 posts in 2921 days
#5 posted 03-11-2009 07:07 PM
-- masrol, kuala lumpur, MY.
1284 posts in 3073 days
#6 posted 03-11-2009 07:43 PM
I like this one. I will have to make one of these.
-- A thing of beauty is a joy forever...
1386 posts in 3118 days
#7 posted 03-11-2009 09:03 PM
Very nice box! Thanks for sharing.
91 posts in 2482 days
#8 posted 01-24-2010 07:25 AM
I like this very much….Do you have the dimensions?
-- ALS IK KAN “to the best of my ability,”
#9 posted 01-25-2010 01:22 AM
The box is about 8×8 x 5. I built mine after looking at an example from Schlabaugh and Sons in a gift shop. Wood Magazine ran an article on a very similar design in Nov 2006 (issue 173 page 68). Their design has a hinged lid while my lid is not connected.
4048 posts in 2619 days
#10 posted 01-25-2010 01:49 AM
nice work, did you use the same finnish plan as in wood mag?
-- Ike, Big Daddies Woodshop, http://email@example.com
#11 posted 01-25-2010 02:01 AM
The finish was a bit a powdered red mahogany dye dissolved in General Finishes oak stain. Topcoated with General wiping oil/varish satin poly.
Go to Pulse page »
©2016 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics