|Project by edwood1975||posted 04-27-2015 03:31 PM||1501 views||2 times favorited||2 comments|
In the near future I decided that I need to upgrade my Kreg Jig R3 to the K4 model and I saw a plan on the Kreg website that gave plans on how to build a mount that has a drawer built into the box for all the clamps and screwsetc etc…
I made a few alterations because I didn’t need it as big as the one on the website….plans are below
I have not got the jig yet but I got the specs online and built my unit according to them…..
Firstly I had some pine board leftover with dimensions of 1×12….so I used it to make the box…and I put it all together using my Kreg r3 jig….
As far as me going into the design and step by step of my project I don’t feel the need to do it since it’s basically a box with a drawer recessed into the frame….
I tried out sme stencil imag designs but they came out horrible so I sprayed painted the box with the same color..
And used 2 hinge latches I got at the HD….