|Project by Ted Alexander||posted 04-11-2015 10:51 PM||2509 views||13 times favorited||15 comments|
Its spring and I wanted a table that I could put on the back patio. Found some great cedar at the home center and decided that is what I would use. The table has a 2×6 top with a 2×6 back. I used my CNC to carve a couple of hummingbirds in the back. There is also a shelf on the bottom that is made from ripped 2×6’s. The cedar was all rough that I sanded down. The finish is teak oil. Here is a link to the video if you care to watch the build.
-- Ted Alexander