or Join Now!
My first official jig built on the table saw, and for the table saw. Now I can make some tenons!
May 22, 2007
home | projects | blog
18 posts in 3134 days
Preview this project card
1970 posts in 3230 days
#1 posted 05-22-2007 08:26 AM
Great looking jig and a very clean tenon!
10635 posts in 3338 days
#2 posted 05-22-2007 08:33 AM
thats gotta be a big project. But good looking tenons. jockmike
-- (You just have to please the man in the Mirror) Mike from Michigan -
146 posts in 3207 days
#3 posted 05-22-2007 12:36 PM
Very nice looking work. That either took patience, skill, or a mixture of the two. (I’m lacking both right now).
4564 posts in 3402 days
#4 posted 05-22-2007 01:53 PM
You did a great job on the jig, tight clean joints, and the tenon came out nicely.
-- Jesus is Lord!
4474 posts in 3169 days
#5 posted 05-22-2007 04:24 PM
NOW you’re gettin’ jiggy with it.
It’s working great Boaz. What are you making, anything in mind?
-- Carpe Lignum; Tornare Lignum (Seize the wood, to Turn the wood)
#6 posted 05-22-2007 05:31 PM
Thanks for all the comments. Had I had a dado blade, it would have been easier to build this jig. At first I couldn’t get the rails to be exactly 90 degrees to the sides, but after chiselling out carefully the leftovers from the set of cuts I have made with my 1/8” blade, it was much better. The dadoes still came out too wide, and there was some play, but it was okay after all.
My next project is going to be a frame & panel door using 3/4” poplar for the frame and 1/4” birch plywood for the panel.
#7 posted 05-23-2007 12:13 AM
Mark, I guess we both used the same plan for the jig. I just saw yours… Nice work on that.
1804 posts in 3177 days
#8 posted 05-23-2007 03:33 AM
Looks good…..I need to make one myself. What plans are you refering too? How about some shots of it in action?
-- Bob, Carver Massachusetts, Sawdust Maker http://www.capecodbaychallenge.org
#9 posted 05-23-2007 07:37 AM
Bob, I have found the plan in ShopNotes Vol 16 Issue 92 (“Seven must-have Table Saw Accessories”).
426 posts in 3171 days
#10 posted 05-23-2007 08:07 AM
Very nice jig Boaz
For long time I’m planning to build one so maybe I’ll just copy yours with some small variations to fit my TS fence although, in EU working on the TS without blade guard is prohibited…
#11 posted 05-23-2007 08:32 AM
Niki, for a jig-master such as yourself, this will take less than an hour to finish ;)
42 posts in 3113 days
#12 posted 05-25-2007 04:14 PM
Nice! We are kindred spirits. The ride-on-the-fence jig concept is a winner. It has come to my rescue more than a few times.
Go to Pulse page »
©2015 Verticalscope Inc. All Rights Reserved. |
Terms of Service
DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.
Latest Projects |
Latest Blog Entries |
Latest Forum Topics