Bulletin, just in.

  • Advertise with us
Project by Neil Davis posted 04-08-2015 02:01 AM 585 views 0 times favorited 1 comment Add to Favorites Watch

A bulletin board for a church. Tinted quarter inch cork, Ash surround and frame. Cam locks, thirty six inch piano hinge each side. Poly-carbonate sheeting for the glass. I used African purple heart for the pegs at each corner of the front frame and for some plugs on each end. I turned the purple heart down on the lathe and then drilled a hole and ran it through and cut off, repeat. I used a french cleat to hang the bulletin board on the wall. The Ash is stained with Honey Oak and has three coats of poly with a light sanding in between. Approximately 36 inches tall and 69 inches wide and 3 inches deep.

1 comment so far

View Jim Jakosh's profile

Jim Jakosh

16799 posts in 2526 days

#1 posted 05-03-2015 04:03 PM

Very nice bulletin board. A lot of thought went into that and came out great!!

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics