LumberJocks

Pocket Hole Jig

  • Advertise with us
Project by InFoGiLy posted 04-06-2015 10:08 PM 1315 views 0 times favorited 3 comments Add to Favorites Watch

I seen all these pocket holes to attach timber and I thought what a great idea. Did the research, seen what others have done, bought three drill bits with augers & a longer phillips head drill bit. I created the above. I also put a small cut on the the wood so I can line up where the pocket hole starts. I made 32 pocket holes…





3 comments so far

View MT_Stringer's profile

MT_Stringer

3080 posts in 2984 days


#1 posted 04-06-2015 10:14 PM

Looks like it will work.

-- Handcrafted by Mike Henderson - Channelview, Texas

View InFoGiLy's profile

InFoGiLy

52 posts in 941 days


#2 posted 04-07-2015 02:19 AM

it worked fine MT… thinking of making another but a bit wider so i can do two at a time.

View bushmaster's profile

bushmaster

2265 posts in 2036 days


#3 posted 04-09-2015 12:35 AM

I Had a hard piece ofhard wood and it broke the step down tip of the drill on the second hole. I found a wood twist drill worked better, the sharp cutting corner on those drills once started would slice right in and not push off to one side, then finish the hole for the screw with a long drill bit.

-- Brian - Hazelton, British Columbia

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com