|Project by ajthomas5009||posted 04-05-2015 03:12 PM||1182 views||3 times favorited||1 comment|
This is a simple shop project I completed a cpl mo ago. I made it between finishing other projects. I’ve found that simple projects like this help clear my mind when I get stuck on more complicated ones.
I made this because my hand tools would constantly get dull laying on my dirty bench during projects. So I figured some simple mobile storage would cut down on needless sharpening.
The wood is some 1/2 Teak plywood I aquired off CL last summer. It was probably some of the best quality ply I’ve used. Not a single blemish or void between plys and both veneers were nice quality. I got the idea for the design off of a wood magazine issue. It’s basically grooves made on the table saw with a dado stack.
I finished it with 3 coats of BLO/poly home brew.
-- Sometimes you're flush and sometimes you're bust, and when you're up, it's never as good as it seems, and when you're down, you never think you'll be up again, but life goes on.