|Project by Dick, & Barb Cain||posted 02-16-2009 01:07 AM||5507 views||6 times favorited||16 comments|
CelestofThrive, a fairly new member, came up with challenge for us Lumberjocks.
You can read about it here.
So I’ve been diddling around with my Sketchup, to see what I could come up with.
The Tapered legs are cut from a 2 X 6, you get 2 legs with each tapered cut.
You will be able to get all of the leg parts from one 10 foot 2 X 6.
The top can be 3/4” plywood, or vinyl coated panel.
The side aprons are 1 X 4 boards.
As you can see from the images, the legs are hinged, so you just fold them under to
make the conversion.
Go here to see the 3D version of my plan.
This was a kind of fun project to design.
I had a chance to practice my Sketchup skills.
-- -** You are never to old to set another goal or to dream a new dream ****************** Dick, & Barb Cain, Hibbing, MN. http://www.woodcarvingillustrated.com/gallery/member.php?uid=3627&protype=1