LumberJocks

Bandsaw box #1

  • Advertise with us
Project by phil7b7 posted 03-27-2015 06:27 PM 803 views 0 times favorited 9 comments Add to Favorites Watch

Bandsaw box made of maple and walnut, finished with danish oil and poly. This was my first completed bandsaw box and my first attempt at flocking. Flocking was easier than expected after reading some advise on LJs and reviewing some youtube videos. This box was made from a template online, unfortunately I can not find the file to give credit where credit is do. If anyone recognizes the pattern please post where the pattern is from.





9 comments so far

View Ocelot's profile

Ocelot

1470 posts in 2098 days


#1 posted 03-27-2015 10:29 PM

Pretty box. I haven’t yet made my first bandsaw box, but if I had made that one, I would be pleased with it.

-Paul

View Hawaiilad's profile

Hawaiilad

2890 posts in 2481 days


#2 posted 03-27-2015 11:59 PM

Great looking box for your first try. I have made that design many times in the past. Not sure if I copied it or drew it. Where did you find the small drawer pulls?

-- Larry in Hawaii,

View firefighterontheside's profile

firefighterontheside

13442 posts in 1316 days


#3 posted 03-28-2015 12:21 AM

Very nice looking. I made my first one last week. I made my tenth one this week.

-- Bill M. "People change, walnut doesn't" by Gene.

View phil7b7's profile

phil7b7

140 posts in 740 days


#4 posted 03-28-2015 02:59 AM

Hawaiilad drawer pulls are from woodcraft

View Hawaiilad's profile

Hawaiilad

2890 posts in 2481 days


#5 posted 03-28-2015 03:45 AM

Were the drawer pulls standard size or special sized for smaller drawers?

-- Larry in Hawaii,

View NormG's profile

NormG

5499 posts in 2464 days


#6 posted 03-28-2015 02:17 PM

Very nicely done

-- Norman - I never never make a mistake, I just change the design.

View phil7b7's profile

phil7b7

140 posts in 740 days


#7 posted 03-28-2015 04:25 PM

Hawaiilad they were sized for smaller drawers, I purchased them in store in Utah. I just looked and was unable to find them on the website. They knob is about 3/8 diameter with a screw mounted to the back. Close to these ones at Rockler http://www.rockler.com/solid-brass-knobs-select-size

View UncleStumpy's profile

UncleStumpy

707 posts in 1772 days


#8 posted 03-29-2015 08:42 PM

Beautiful!

After you get a few under your belt, you might find it a lot more satisfying to think up your own designs.
Most of these BS boxes have been done a hundred times. One of your own design would be one of a kind!

-- "They don't want it perfect - they want it SPECIAL"

View phil7b7's profile

phil7b7

140 posts in 740 days


#9 posted 04-14-2015 02:25 AM

Design/pattern was from http://www.thecarmichaelworkshop.com/p/project-plans.html the Carmichael Workshop.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com