LumberJocks

Vanity Boxes with reclaimed Oak firewood

  • Advertise with us
Project by Arcola60 posted 03-26-2015 12:55 AM 746 views 0 times favorited 1 comment Add to Favorites Watch

Here are 2 vanity boxes made from some Red Oak firewood. It did not make the FIRE! It was the first time doing box joints with my Incra original positioner. It has been used just as a basic router fence, not utilizing its full potential. It really worked well. I will be doing more challenging joints in future projects.
I finished them with 3 coats of WB Poly. They measure 8”X12”X4” Tall. I cut 1/4” spacing. I used my French curves to lay out the bottom cut outs. I also used the positioner to cut the groove to accept the bottom. Everything referenced perfectly with one set up. The only adjustment was the bit height for the bottom groove.
The old plastic boxes have seen better days.

Ellery BECNEL





1 comment so far

View Jim Jakosh's profile

Jim Jakosh

17154 posts in 2568 days


#1 posted 04-20-2015 01:34 AM

Nice boxes, nice joinery!! I love recycling wood that would normally get thrown out of burned. You gave it new life!!

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com