LumberJocks

Cherry Entry way Locker

  • Advertise with us
Project by fladdy posted 03-24-2015 01:03 AM 612 views 1 time favorited 2 comments Add to Favorites Watch

This is an entryway locker that I made for some friends. They wanted one to fit in a corner of a room that leads to the garage. Something to hold jackets, hats, gloves, some other odds and ends. This is my first project using cherry. I was surprised to learn how soft it was. I used full extension drawer slides. I also had to trim the crown moulding to fit flush with the corner of the wall (on the left side). They also wanted me to install the locker which meant doing some trim work as well.

Overall, I think it turned out well. Very functional. I used 3/4” plywood for the base and bench top, so it feels very solid. I also used a few dowels to line up the top cabinet piece with the bottom and a few screws to hold them together.

One thing that I’m learning with my projects is that I might as well make 2 of whatever I’m making. It never fails that there is a friend that wants whatever I’m making, but didn’t mention anything until I was half way done.

-- Fladdy





2 comments so far

View aussiedave's profile

aussiedave

3114 posts in 1290 days


#1 posted 03-24-2015 04:09 AM

Very nice locker…you did a great job, well done.

-- Dave.......If at first you don’t succeed redefine success....

View Ken90712's profile

Ken90712

16957 posts in 2655 days


#2 posted 03-24-2015 09:54 AM

Well done, Should serve you well.

-- Ken, "Everyday above ground is a good day!"

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com