LumberJocks

Router Bit Box

  • Advertise with us
Project by Sheldon posted 05-16-2007 07:11 PM 1556 views 7 times favorited 7 comments Add to Favorites Watch

Simple box I built for my 1/4” shaft router bits.

-- Technology is great - when it works......... the Lord is great always.





7 comments so far

View PanamaJack's profile

PanamaJack

4473 posts in 2824 days


#1 posted 05-16-2007 07:20 PM

Simple is good. Built to last. Well done.

-- Carpe Lignum; Tornare Lignum (Seize the wood, to Turn the wood)

View VTWoody's profile

VTWoody

95 posts in 2804 days


#2 posted 05-16-2007 07:34 PM

Panama,

I am in the process of designing a case very similar to this for my poker chips and was wondering if you could tell me how you made the top and bottom.

Thanks

View mot's profile

mot

4911 posts in 2783 days


#3 posted 05-16-2007 07:54 PM

Go go gadget, Sheldon! Keep em coming. Nice case!

-- You can discover more about a person in an hour of play than in a year of conversation. (Plato)

View Sheldon's profile

Sheldon

59 posts in 2782 days


#4 posted 05-16-2007 08:06 PM

I actually built a box using nothing more than rabbits on every joint.
I then ran it through the table saw to seperate the bottom from the top where I wanted it.
I then put inside rails, hasp, and hinges,,, and then tung oiled it 3 or 4 times.

-- Technology is great - when it works......... the Lord is great always.

View jockmike2's profile

jockmike2

10635 posts in 2993 days


#5 posted 05-17-2007 01:22 AM

Nice box, you should made some holes for 1/2 in bits. you just never know, I found a 1/2 in router new for $ 89.00 and works perfect. mike

-- (You just have to please the man in the Mirror) Mike from Michigan -

View oscorner's profile

oscorner

4564 posts in 3057 days


#6 posted 05-17-2007 02:38 AM

Great box, I see you’ve left plenty of room to be filled with new router bits.

-- Jesus is Lord!

View USCJeff's profile

USCJeff

1044 posts in 2815 days


#7 posted 05-17-2007 03:20 AM

Nice look. I have a design for a chisel box simliar to this I am planning on getting to one of these days. It is the same box, but with partitions that have half circles cut out of them. Smart move to make the entire box and cut the top and bottom from it. I did this the hard way one time.

-- Jeff, South Carolina

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase