Drill press drum sander jointer / planer - post

  • Advertise with us
Project by mafe posted 03-15-2015 06:10 PM 3530 views 8 times favorited 13 comments Add to Favorites Watch

Drill press drum sander jointer / planer
MaFe again…

Ok this post is a mess, so is the blog…
But what you see is what you made…
Stop MaFe!
It’s a drill press drum sander planer / jointer and it works.
Even dust free.
Build on top of the table from last blog.

You can find the blog here, think you need that to fully understand:

1. The drum sander planer.
2. Basic idea.
3. Layers of MDF.
4. Guess we are close.
5. Infeed table are glued in place.
6. Bang.

Hope can inspire, perhaps even to get more use of your drill press.

Best thoughts,


-- MAD F, the fanatical rhykenologist and vintage architect. Democraticwoodworking.

13 comments so far

View Bricofleur's profile


1445 posts in 3217 days

#1 posted 03-15-2015 06:15 PM

Smart idea, Mads. I like it.



-- Learn from yesterday, work today and enjoy success tomorrow. --

View patron's profile


13606 posts in 3365 days

#2 posted 03-15-2015 07:20 PM

great planer mads

if you are too confused with this
just send it to me

you can tackle something else
and i can use it instead

-- david - only thru kindness can this world be whole . If we don't succeed we run the risk of failure. Dan Quayle

View Jerry's profile


2654 posts in 1672 days

#3 posted 03-15-2015 07:34 PM

Pretty darned clever Mafe. Congrats on the new hardware.

-- There are good ships and there are wood ships, the ships that sail the sea, but the best ships are friendships and may they always be.

View kiefer's profile


5619 posts in 2691 days

#4 posted 03-15-2015 07:34 PM

Looks great and the blog is a big help .
As soon as I find that SUPER SANDER I will build one .


-- Kiefer

View Jim Jakosh's profile

Jim Jakosh

20594 posts in 3129 days

#5 posted 03-15-2015 09:35 PM

Neat design,Mads!!

-- Jim Jakosh.....Practical Wood Products...........Learn something new every day!! Variety is the Spice of Life!!

View shipwright's profile


7992 posts in 2822 days

#6 posted 03-15-2015 11:57 PM

Way too much fun Mads.


-- Paul M ..............If God wanted us to have fiberglass boats he would have given us fibreglass trees.

View doubleDD's profile


7435 posts in 2067 days

#7 posted 03-16-2015 12:33 AM

Super idea. Now you need a port hole for dust.

-- Dave, Downers Grove, Il. -------- When you run out of ideas, start building your dreams.

View Roger's profile


20928 posts in 2828 days

#8 posted 03-16-2015 12:46 AM

I do like the adjustment there also.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed.

View Rob Drown's profile

Rob Drown

789 posts in 3856 days

#9 posted 03-16-2015 12:59 AM

Very dog gone cool!!!

-- The expectations of life depend upon diligence; the mechanic that would perfect his work must first sharpen his tools. Confucius, 经过艰苦的努力的梦想可以成真

View ChipOffTheOldBlock's profile


65 posts in 1762 days

#10 posted 03-16-2015 01:53 AM

Wow, what a cool idea! Thanks for sharing.

-- "Excellence is a thousand things done just a little bit better"

View mafe's profile


11730 posts in 3113 days

#11 posted 03-16-2015 02:12 AM

Hi there,
Chip off, I love to share and to get inspired from what the rest of you share, that’s why I’m here. ;-)
Rob, wouuufff.
Roger, smiles here, perhaps I should had put it from under the lift, but then one needed to adjust from the back….
doubled, look at this blog: it sits on top of the table so the suction are taken care of, in fact it’s almost dust free.
Paul, yes way too much fun, big smile.
Jim, thanks, just fooling around with MDF here.
Kiefer, did you see the blog I made about the Supersander, people left links there.
Jerry, another toy.
Patron, laughs, I will probably be too confused to find the post office.
Brico, thanks.
Thank you all for the kind comments.
Best thoughts,

-- MAD F, the fanatical rhykenologist and vintage architect. Democraticwoodworking.

View Mainiac Matt 's profile

Mainiac Matt

8085 posts in 2352 days

#12 posted 03-16-2015 01:06 PM

Clever design Mads.

Thanks for sharing it.

-- It’s the knowledge in your head, skill in your hands and motivation to create in you heart that makes you a woodworker. - Mainiac Matt

View stefang's profile


15881 posts in 3358 days

#13 posted 03-17-2015 11:38 AM

Another brilliant tool from your shop Mads!

-- Mike, an American living in Norway.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics