| Project by 4hisglory | posted 297 days ago | 375 views | 0 times favorited | 4 comments | ![]() |
![]() |
This was my first box I built for my wife for our first year together. I believe I built this back in 1998 or so. I picked out a box of her favorite chocolates and made this box to fit them. I presented it like anyone would present a box of chocolates but I made the box hehe. Wood is oak with a light pink aniline dye which has faded and then clear coated with high gloss oil poly. The inside is lined with felt and the entire piece is made from one piece of wood. When you look at the edge of it the end grain rays run from top to bottom. The top is actually very tight and does not fall off. I carved a light relief into one of the arcs which is just enough to pry the lid off with your finger tip while not being obvious.
-- 3rd generation craftsman ~ www.passionforwoodworking.com
































4 comments so far
DaveR
home | projects | blog
1517 posts in 614 days
posted 297 days ago
I like that. Very nice. How did you hollow it out?
-- Until you spread your wings, you'll have no idea how far you can walk.
4hisglory
home | projects | blog
51 posts in 344 days
posted 297 days ago
The box was resawn into 3 sections top ~ center ~ bottom. Then the center was cut out with a bandsaw and glued back to the base rendering it seamless as it came from the same piece of wood. The top is tightly rabbeted so as to not fall off of the box.
-- 3rd generation craftsman ~ www.passionforwoodworking.com
DaveR
home | projects | blog
1517 posts in 614 days
posted 297 days ago
Aha! Well, I couldn’t tell it was sawn that way. Good on you.
-- Until you spread your wings, you'll have no idea how far you can walk.
Hrolfr
home | projects | blog
171 posts in 559 days
posted 296 days ago
Nice box glory!!!!!!!
-- Hrolfr