|Project by socrbent||posted 03-11-2015 03:42 AM||955 views||0 times favorited||7 comments|
Largely because of my poor turning skills, a catch when close to finishing this bowl resulted in breaking off a large chunk. Flattened the larger piece on the band saw and belt sander, did as much sanding as possible on inside, glued on the walnut board, shaped on disk sander, then much sanding starting with 80 grit on a oscillating sander and progressing up to 1000 by hand. 1 coat so far of BLO. Main part of bowl is emerarld ash borer victim with walnut flat added.
-- socrbent Ohio