|Project by Tom Howbridge||posted 03-07-2015 09:25 PM||1033 views||0 times favorited||0 comments|
I enjoyed making this project and it works a treat. Using some oak.
I first clamped a stop block to my router table fence, before routing a recess as shown, Next i clean up the edge with a chisel chopping the round edges square. I placed a bottle in the recess and marked the screw locations, then I pre drilled and screw two flat head screws in place just touching the shoulder of the recess to give extra strength when opening bottles.
I then knocked of a few of the sharp corners with my hand plane and sanded to 400 grit, then I rubbed a Danish oil finish, I think next time I will experiment using different finishings as Danish is not really the right thing for this, but I think it turn out great.
check out the video HERE https://www.youtube.com/watch?v=3yktWcCp1mE
-- Check out my weekly videos at http://www.youtube.com/TomHowbridge