A Batman Spatula From Claro Walnut

  • Advertise with us
Project by Peter Brown posted 03-04-2015 05:02 PM 1276 views 4 times favorited 6 comments Add to Favorites Watch
A Batman Spatula From Claro Walnut
A Batman Spatula From Claro Walnut No picture No picture No picture No picture No picture
Zoom Pictures

The kitchen spatula you need for your late night pre-crime fighting sandwich making. Made from a $1 spatula with a custom cut claro walnut handle and finished with boiled linseed oil.

This is just a for fun project, sometimes those are my favorites…

I picked up a inexpensive spatula from the local $1 store. The handle was some cheap dyed pine wood secured with equally cheap aluminum pins.Knocking out the pins with an awl took 30 seconds or so.

I re-sawed some walnut down to 3/8 of an inch to reveal some truly exquisite grain! Next I printed off a stencil of the Batman logo (insert your favorite sports team here) I preferred and adhered it to the blank with a shot of spray adhesive.

Take your time with cutting the design, it will save you considerable sanding time later in the process. I was using a 3/16” 4 tpi skip tooth blade. I got mine from Highland Woodworking, and it’s a great blade. You could also do this on the scroll saw or with a CNC if you’re luckily enough to have access to one.

The next step was a mystery. I’ve never made a knife or similar implement, so I wasn’t sure when I should epoxy in the metal. I took a guess and figured it should be fine. It was.

After the glue dried, it was just a matter of sanding. Taking my time on the band saw really reduced the need for sanding. I started with the belt sander to flatten the faces and remove all the saw marks from the outside radius. I also took the time to add a bevel to the front and the back with sweeping motion at the sander.

Next it was on to the detail work. I tried to use my sanding drum attachments for the drill press, but the smallest one was still too big for most of the curves. There was nothing to it but hand sanding. I think I was at it for about 20 minutes or so. It’s hard to be sure, sometimes I loose track of time in the shop when the camera isn’t running.

The finish is boiled linseed oil. I think lacquer or shellac would be better choices for a kitchen utensil but I didn’t have either in the shop at the time.

The handle is much more comfortable than I make out in the video. Truth be told, it actually fits quite nice, but I really, really, really wanted to add that end bit in!

Thanks for looking!

-- Peter Brown - Collector of WD-40 and wood splinters

6 comments so far

View Sam Shakouri's profile

Sam Shakouri

1192 posts in 2510 days

#1 posted 03-04-2015 05:18 PM

Good idea.

-- Sam Shakouri / CREATING WONDERS WITH WOOD.....Sydney,Australia....

View Paul Bucalo's profile

Paul Bucalo

586 posts in 781 days

#2 posted 03-04-2015 05:25 PM

Well done, Peter.

I was just thinking…knife blade instead of spatula…hinge pin on the end the blade goes in…slotted side for the blade to retract into…simple mechanical lock for both open and closed state…and I need to get back to my own projects. :D

-- -- Paul Bucalo, Upstate NY USA

View hotbyte's profile


826 posts in 2397 days

#3 posted 03-04-2015 07:51 PM

Nice. My son would love that. He’s 21 now and been a batman nut since he was 2.

View robscastle's profile


3318 posts in 1626 days

#4 posted 03-05-2015 10:55 AM

Holy Spatulas Batman thats very well done and supported by great explainations and video to Boot!!

-- Regards Robert

View majuvla's profile


8714 posts in 2289 days

#5 posted 03-05-2015 06:01 PM

You’ve done it excellent!

-- Ivan, Croatia, Wooddicted

View Patrick's work shop's profile

Patrick's work shop

134 posts in 1030 days

#6 posted 03-07-2015 06:19 PM

the Batchula hey Peter

-- Patrick's work shop

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics