• Advertise with us
Project by Lou posted 02-22-2015 09:38 PM 2095 views 11 times favorited 11 comments Add to Favorites Watch
Coasters No picture No picture No picture No picture No picture
Zoom Pictures

Coasters made from small left over walnut scraps from other projects. Stained with Gunstock and Black walnut then urethane . Very functional. Make nice presents.

-- What to make next. Hmmm.

11 comments so far

View Vince's profile


1152 posts in 3514 days

#1 posted 02-22-2015 09:45 PM

Nice work

-- Vince

View dpow's profile


503 posts in 2929 days

#2 posted 02-22-2015 10:21 PM

Nice project. I like how the bottom of the holder appears to be another coaster until the top 4 are removed.

-- Doug

View Lou's profile


78 posts in 1275 days

#3 posted 02-23-2015 03:48 AM

Thanks guys.

-- What to make next. Hmmm.

View Gary's profile


14 posts in 1972 days

#4 posted 02-23-2015 06:15 AM

I really like these.Great job.

View majuvla's profile


12683 posts in 2953 days

#5 posted 02-23-2015 07:19 AM

Awsome set,it’s adorable. Nice finish. Overal look is great.

-- Ivan, Croatia, Wooddicted

View redryder's profile


2393 posts in 3187 days

#6 posted 02-23-2015 10:00 AM

These are great looking.

How was the design pattern made???

-- mike...............

View Lou's profile


78 posts in 1275 days

#7 posted 02-23-2015 01:23 PM

Thanks. Made the pattern on my router table with a V-groove sign bit. Coasters are 4” by 4”. Set solid fence at 3.5” from bit. Clamped a board 3.5” to right of bit and another board 3.5” to left of bit. They control the start and stop of a pass and must be perpendicular to the fence. Make a pass on the router, turn coaster 90 degrees and make another pass. Add a .5” shim to the fence and make 2 more passes parallel to the first 2 passes. Repeat adding shims and making passes until the coaster is complete. A good strong tooth brush will clean out the groves.

-- What to make next. Hmmm.

View nayo's profile


294 posts in 1978 days

#8 posted 02-23-2015 01:41 PM

those are some looking good coasters

View mcoyfrog's profile


4252 posts in 3679 days

#9 posted 02-23-2015 07:50 PM

Very kwel

-- Wood and Glass they kick (well you know) Have a great day - Dug

View Rick1970's profile


8 posts in 1299 days

#10 posted 02-24-2015 02:29 AM

Very nice. Love that you’re not afraid to go with a, “non traditional” finish.

-- I'd rather be making sawdust.

View dbw's profile


206 posts in 1722 days

#11 posted 02-28-2015 05:21 PM

good job! sound like a lot of work!

-- measure 3 times, cut once

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics