Tree and metal always nearby.

  • Advertise with us
Project by Sasha posted 02-15-2015 10:20 AM 1661 views 0 times favorited 8 comments Add to Favorites Watch

Tree and metal always nearby. They always decorated and supplemented each other. Process (lesson) to decorate metal of everyday life. It is very easy and simple. If interests ask. I will be glad to help.

-- Ganchik Sasha. Life shouldn't be a draft copy.....

8 comments so far

View recycle1943's profile


2304 posts in 1766 days

#1 posted 02-15-2015 11:38 AM

very nice – is that an acid etching process ?

-- Dick, Malvern Ohio - my biggest fear is that when I die, my wife sells my toys for what I told her I paid for them

View Sasha's profile


871 posts in 1356 days

#2 posted 02-15-2015 12:32 PM

Acid etching is harmful and dangerous. I use solution salt and a copper vitriol.

-- Ganchik Sasha. Life shouldn't be a draft copy.....

View majuvla's profile


13024 posts in 3011 days

#3 posted 02-15-2015 01:33 PM

Awsome metal carving too!

-- Ivan, Croatia, Wooddicted

View mmh's profile


3677 posts in 3866 days

#4 posted 02-15-2015 02:20 PM

Very interesting technique. How is the salt and copper vitriol applied? What are the red and the black substances?

Thank you for sharing!

-- "They who dream by day are cognizant of many things which escape those who dream only by night." ~ Edgar Allan Poe

View bushmaster's profile


3233 posts in 2427 days

#5 posted 02-15-2015 03:14 PM

Any information on this process is appreciated. I taught metal work for years but did not run into this process. Looks great. I have only etched aluminum and it definately was with acid.

-- Brian - Hazelton, British Columbia

View Sasha's profile


871 posts in 1356 days

#6 posted 02-15-2015 03:42 PM

1. The place where will be drawing to stick with an insulating tape.
2 to paint with atsetonovy paint around.
It quickly dries and strong keeps.
3 to clean an insulating tape and to paint solution white spirit and pitch black oil (tar on building use).
4 on a black place to put with a needle drawing. I inserted the ground nail into a ball pen. The solution sated with salt (water and salt) to add a copper vitriol. On 1 liter 50 grams. To load a detail into solution. In an hour to look. On a place of drawing (flute) there is a red raid. Slowly to wash away a stream of cold water. I used very soft brush. Then still to lower in solution and to control up to the necessary depth of etching. I filled in solution in a kapron (plastic) pipe (economy of solution). When it is ready – to wash out well (plentifully) water and solvent to wash away paint. At first it is necessary to be trained. Good luck.

-- Ganchik Sasha. Life shouldn't be a draft copy.....

View kiefer's profile


5619 posts in 2811 days

#7 posted 02-15-2015 04:24 PM

Nice work and an interesting process .


-- Kiefer

View Rob W's profile

Rob W

434 posts in 3680 days

#8 posted 04-30-2015 07:29 PM

Very cool! Thanks for sharing

-- Rob — I've cut it off twice and it's still too short!,

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics