LumberJocks

Walnut Guitar Stand

  • Advertise with us
Project by Eddie Elizondo posted 02-13-2015 12:25 AM 2661 views 12 times favorited 8 comments Add to Favorites Watch

This is a walnut guitar stand with some purple heart laminated in. I tried to do something different with the guitar neck support and at the bottom where all the pieces come together. I think I came out much better than the first one. I am going to do something different with the bottom piece on the next one. I used leather for the guitar contact points and this in itself was a challenge because of the corners. But I figured it out and it worked. This is bent lamination for the curves. both pieces have five 1/8 inch strips glued down with Titebond II. I finished it with five coats of tung oil polished to a high shine.
Let me know what you think. Love the feedback.
Thanks for looking.


-- Eddie -





8 comments so far

View B's profile

B

137 posts in 953 days


#1 posted 02-13-2015 02:01 AM

This is absolutely gorgeous Eddie.I love the gentle curves and the leather accents.How did you attach the leather? As well are you worried about the short grain on the two feet breaking off over time or if someone accidentally bumps into it?

-- A poor workman blames his tools. Mr.B, Ontario Canada - https://www.instagram.com/boysbeit/

View Eddie Elizondo's profile

Eddie Elizondo

68 posts in 3303 days


#2 posted 02-13-2015 02:12 AM

Boy, Thanks for the comments. the leather was attached using contact cement. You have to be careful applying it because it just gets on everything. As for the end grain, I selected some nice grain lumber and actually did drop it a few times with no damage other than some dings which sanded out easy enough. I have thought about laminating some cross grain in it to give some accent and strength. Maybe on the next one just to see what it would look like. Thanks for looking.

-- Eddie -

View Roger's profile

Roger

19881 posts in 2269 days


#3 posted 02-13-2015 01:43 PM

Very smooth and delicate. Wow, that’s mighty fine.

-- Roger from KY. Work/Play/Travel Safe. Keep your dust collector fed. Kentuk55@yahoo.com

View CL810's profile

CL810

3452 posts in 2454 days


#4 posted 02-13-2015 02:58 PM

Gorgeous! I like everything about this: design, wood selection and the finish is great!

-- "The only limits to our realization of tomorrow will be our doubts of today." - FDR

View _Daniel_'s profile

_Daniel_

38 posts in 893 days


#5 posted 02-13-2015 03:14 PM

Beautiful guitar stand.

View ohwoodeye's profile

ohwoodeye

1740 posts in 2619 days


#6 posted 02-13-2015 03:53 PM

Very nice. I don’t play guitar but this stand makes me wish I did.
Very well done.

-- Directions are just the Manufacturer's opinion on how something should be assembled. ----Mike, Waukesha, WI

View Mike Shaffer's profile

Mike Shaffer

14 posts in 663 days


#7 posted 02-17-2015 12:37 AM

Very nice. My son plays the guitar and I would like to make him one. Would you mind if I copied you work?

View Eddie Elizondo's profile

Eddie Elizondo

68 posts in 3303 days


#8 posted 02-17-2015 02:00 AM

Mike, no problem you using my design for personal use, would appreciate not using for resale right now. Thanks.

-- Eddie -

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com