LumberJocks

Zebrawood Winged Bowl

  • Advertise with us
Project by jbrinkman posted 01-07-2009 02:39 PM 1880 views 2 times favorited 6 comments Add to Favorites Watch

This is a simple Zebrawood winged bowl that I created for a gift to our dog sitter for her 18th birthday. The bowl was buffed and finished with light wax coating.

You can read an article I did on creating this bowl on my blog. This article was subsequently reprinted in the Nov. 2008 NCWT newsletter

-- Joe Brinkman, Ohio - http://blog.theaccidentalgeek.com





6 comments so far

View Thos. Angle's profile

Thos. Angle

4435 posts in 2613 days


#1 posted 01-07-2009 02:44 PM

Really neat. Another one of those,”howdedodat?”.

-- Thos. Angle, Jordan Valley, Oregon

View jbrinkman's profile

jbrinkman

33 posts in 2093 days


#2 posted 01-07-2009 03:29 PM

The biggest key is to turn at the fastest safe speed. This is probably not a good first project as your “fastest safe speed” is probably not sufficient. After you get a little more experience, you find that you can turn at much higher speeds, which is necessary when doing projects which require “turning air”. I sat in on a Jimmy Clewes demo where it sounded like we were in a giant wind tunnel.

-- Joe Brinkman, Ohio - http://blog.theaccidentalgeek.com

View lew's profile

lew

10025 posts in 2406 days


#3 posted 01-07-2009 05:22 PM

Another gorgeous piece!!

Great Article, too!

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View Bigbuck's profile

Bigbuck

1347 posts in 2314 days


#4 posted 01-07-2009 07:21 PM

Very nice piece, I like the design

-- Glenn, New Mexico

View craven's profile

craven

53 posts in 2223 days


#5 posted 01-07-2009 11:48 PM

Holy smokes, timing is everything! I just glued up a couple pieces of cherry to make a bowl of a very similar design! While I was waiting for the glue to dry, I thought I would check out my favorite hangout, and I saw your bowl Joe! I thought I had thought of a really unique design (dang, beat out by a couple of hours!!!) Great design and execution! I will post mine in a day or two. I think you’ll appreciate the irony! Thanks, and happy new year, Craven

-- let the chips fly!

View jbrinkman's profile

jbrinkman

33 posts in 2093 days


#6 posted 01-08-2009 12:01 AM

Craven – I got my original idea from a Bill Grumbine video. I had previously created a square bowl using a different technique which was more awkward, but better suited to my skills at the time. I’ll post a new project so you can see my original attempt at a square bowl.

-- Joe Brinkman, Ohio - http://blog.theaccidentalgeek.com

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase