LumberJocks

Glue Caddy

  • Advertise with us
Project by edwood1975 posted 02-11-2015 02:26 AM 1370 views 3 times favorited 6 comments Add to Favorites Watch

I was tired of finding glue bottles all over the shop and I figured a little caddy would be useful

I truly used scrap wood for this little project. Let me see the sides are made of OSB, the base is pine and the end pieces are MDF, and handle is 1” dowel.

-- Ed





6 comments so far

View timbertailor's profile

timbertailor

1592 posts in 889 days


#1 posted 02-11-2015 03:24 AM

I thought I was the only one that used such a handy solution.

I find them VERY useful. Thanks for sharing.

P.S. One suggestion. Drill a few holes in the top of a couple of the sides to hold pencils and wet acid\gluing brushes. They will come in handy.

-- Brad, Texas, https://www.youtube.com/user/tonkatoytruck/feed

View greg48's profile

greg48

588 posts in 2223 days


#2 posted 02-11-2015 04:00 AM

Glad to see you keeping busy during these long winter months. It also appears that you have taken well to utilizing SketchUp in your project process

-- Greg, No. Cal. - "Gaudete in Domino Semper"

View edwood1975's profile

edwood1975

495 posts in 808 days


#3 posted 02-11-2015 04:11 AM



Glad to see you keeping busy during these long winter months. It also appears that you have taken well to utilizing SketchUp in your project process

- greg48


Sketchup is awesome it allows me to see my design flaws before I touch wood… To be honest it’s good to go back and remake something following the plans I made…

If I’m not woodworking I’m computer working….

I can’t wait for a outside wood project were having a really really BAD winter

-- Ed

View littleladywoodshop's profile

littleladywoodshop

49 posts in 776 days


#4 posted 02-12-2015 02:25 AM

What a great idea.

-- Fail to plan and you are planning to fail. Ben Franklin

View robscastle's profile

robscastle

3392 posts in 1669 days


#5 posted 02-13-2015 05:35 AM

Nice work and inspiring me to make a similar holder for my finish testing components

I also have bits and pieces scattered all over the place

Standby fora blog/progect recognising your post.

-- Regards Robert

View edwood1975's profile

edwood1975

495 posts in 808 days


#6 posted 02-13-2015 12:45 PM



Nice work and inspiring me to make a similar holder for my finish testing components

I also have bits and pieces scattered all over the place

Standby fora blog/progect recognising your post.

- robscastle

Thank you Robert appreciate that

-- Ed

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com