LumberJocks

Serving tray - second hand cut dovetail project

  • Advertise with us
Project by buck_cpa posted 01-31-2015 09:26 PM 1941 views 4 times favorited 3 comments Add to Favorites Watch

Made this out of qswo. On the pins, instead of using a coping saw I used a chisel. This method was easier for defining the baseline – I like the results better. I didn’t work from plans, just measured a casserole dish. Finished it with amber shellac. Last picture is a cutting board made for some good friends. Finished it w a paper bag burnishing and some walnut oil.





3 comments so far

View siavosh's profile

siavosh

674 posts in 1334 days


#1 posted 01-31-2015 10:25 PM

Looking good! I love white oak.

-- http://woodspotting.com/ -- Discover the most interesting woodworking blogs from around the world

View DanielS's profile

DanielS

123 posts in 1400 days


#2 posted 01-31-2015 10:25 PM

Nice looking tray. Does the bottom rest in a groove? If you have small gaps, you can fill them with a mix of sanding dust and wood glue.

-- Daniel S

View buck_cpa's profile

buck_cpa

147 posts in 1350 days


#3 posted 01-31-2015 10:28 PM

Yes. I cut a 1/4” groove to hold the bottom panel. Thanks for the tip.

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com