LumberJocks
DAILY DEALS Painter’s Pyramids  |  Makita Makita Recon LCT203W 10.8 Volt Lithium Ion Impact Driver 2 Pc Kit

Storage Chest

Project by griff posted 331 days ago 468 views 0 times favorited 8 comments Add to Favorites Watch

This is a Storage chest I built for my locker at work. A coworker retired just before the Christmas Holidays. So Im gona move into his old locker area. The company furnishes the lockers but there nothing but a big box with one shelf. To keep from piling every thing in it I, decided to build a box that would fit inside the locker to help keep the tools separated and organized. It will house, hand chain hoists , big wench set,up too 2”” Bigger sockets, smaller wrench and socket sets, Homemade tools Iv made for different task around the mill. A few machinist tools. drill bits and end mill bits and what ever else if any I can get in there. Its 19” W 25”D 42”T Its made of Birch Ply for the sides and drawers. It has sweetgum faceframe and drawer fronts. first time to ever use sweetgum for something other than barn lathes. just wanted to see what it would look like. The box is stained red mahogany and the drawer fronts are finished natural, with several coats of lacquer.
I brought it in the house to get it out of the shop and baby girl is trying to take it over with doll clothes and toys,and dress up princess outfits from Christmas. Thanks for looking.

-- Mike, Bruce Mississippi = Jack of many trades master of none


8 comments so far

View lew's profile (online now)

lew

4483 posts in 649 days


posted 331 days ago

Great looking project!!

View Karson's profile

Karson

25792 posts in 1294 days


posted 331 days ago

Great project. A sawmill where I purchase some wood states that sweet gum warps and bows as it dries. How was your wood and did you have any problems working with it.

I’ve got a couple of boards that I picked up from a scrap pile want they have a big twist. I like unique woods and the sweet gum had some slight color changes. How was it in doing the drawer fronts?

-- What happens in the workshop stays in the workshop. No wait that doesn't sound right. Karson Southern Delaware karson_morrison@bigfoot.com †

View griff's profile

griff

926 posts in 655 days


posted 331 days ago

Karson, The mill where I got lumber told me that they sold sweet gum to furniture frame shops. I`v always been told that it was only good for lathes if you nailed them down green. I wanted to try some just to see how it does . When I first got the lumber it was fresh out of the planer and it was straight and flat. I`v had it stored under an open side shed for several months and not stickered and it has had some direct sun and some moisture. If I had used it when I first got it I believe it would have been a lot better . It did have some twist and some cup on the wider boards. On the bottom wide drawer front I ripped it up in narrow pieces and turned the grains in opposite directions and glued. Other than that It worked good. I think it would be some beautiful wood quartersawn.

I have some black gum also, will be making something out of it soon I hope .

-- Mike, Bruce Mississippi = Jack of many trades master of none

View Dusty56's profile (online now)

Dusty56

3458 posts in 581 days


posted 331 days ago

newbie here…what is a barn lathe ?

-- You know you're getting old when you know the difference between you're (you are) and your (belonging to you) AND how to use them in a sentence .

View rikkor's profile

rikkor

11335 posts in 768 days


posted 331 days ago

That’s a fine looking chest of drawers.

View PebbleCreek's profile

PebbleCreek

60 posts in 377 days


posted 331 days ago

Nice job! Those dolls may be awkward at work.

View Dusty56's profile (online now)

Dusty56

3458 posts in 581 days


posted 331 days ago

Thanks for the lath explanation and your little Princess is so cute : ) Good luck getting the chest away from her without any pouting happening ! hahaha : )

-- You know you're getting old when you know the difference between you're (you are) and your (belonging to you) AND how to use them in a sentence .

View Lee A. Jesberger's profile

Lee A. Jesberger

3710 posts in 873 days


posted 330 days ago

Hi Griff;

I’m surprised you could turn that face down!

They learn really early, how to get their way don’t they. They just charm you right out of anything they want.

Nice;

Lee

-- by Lee A. Jesberger http://www.prowoodworkingtips.com http://www.ezee-feed.com

You must be signed in to post the comments.

  • View all advertisers
  • Advertise with us

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com

Latest Projects | Latest Blog Entries | Latest Forum Topics

GardenTenders.com :: gardening showcase