Canvas painting frame

  • Advertise with us
Project by jasonborthwick posted 01-29-2015 03:29 AM 1243 views 0 times favorited 4 comments Add to Favorites Watch

Project is a 22w x 24 L x 7/8T frame made from laminated cherry and spalted maple. The cherry is 3/4 wide with a 1/2 rabbit for the painting.

The outer frame is milled from one piece maple and the cherry is also milled from one piece.

Miter joints were cut on tablesaw using an incra miter express sled. Anyone that is on the fence for one should pull the trigger it is one of my best tools in the shop.

Miter cuts are reinforced with pocket holes.

Finish is two coats of oil bases poly using 0000 steel wool between coats.

Thanks for looking.

4 comments so far

View Hazem's profile (online now)


71 posts in 969 days

#1 posted 01-29-2015 04:21 AM

Nice. Who’s in the pic if i may ask?

View jasonborthwick's profile


99 posts in 1360 days

#2 posted 01-29-2015 05:00 AM

Thanks, it’s a painting of the father of my client that passed away. I made a consus attempt to pick the spieces of wood to reflect the colors of the painting.

View jroot's profile


293 posts in 944 days

#3 posted 01-29-2015 01:58 PM

I have been looking for a frame for my wife’s paintings. Her canvases are at least 3/4 inch thick. Would this work for her frames?

-- jroot

View ralbuck's profile


3291 posts in 1987 days

#4 posted 01-29-2015 06:05 PM

Nice work on everything; even the “color coordinating.

-- SAWDUST is THERAPY without a couch! just rjR

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics