|Project by jason64||posted 01-26-2015 11:20 PM||973 views||0 times favorited||6 comments|
Ok so I haven’t been on hear in awhile, partially do to my helper just getting old enough to help. And secondly I’ve been using my spare time to work on our kitchen, witch we have made from scratch also its just not done yet( we needed a break). Ok so the bench all we did was plane it down, nock the remaining bark off and got rid of any sharp spots. The slabs are 2.5” thick, I used, 3/4” oak dowls to hold the leg to the bench. Then I took 1” galvanized pipe for the other leg and 3/4” to span the length under the bench. Routed off the square edges and a lot of sanding with help. And then many coats of sealer. Also added 5/16 cork under the steal foot to prevent damage to the floor.