Hall Table

  • Advertise with us
Project by Mikesawdust posted 01-25-2015 02:31 PM 1129 views 2 times favorited 1 comment Add to Favorites Watch

This was made with Chestnut and Walnut for a friend. The walnut edges were all book matched as were the breadboard style end pieces. The drawer handles were designed from an article in finewoodworking, I turned on the lathe from a scrap of rosewood I had from an earlier project.

The drawer sides are made from maple with wood runners, I made a small opening in the front to accommodate a drawer stop that can be swiveled up to remove the Drawer, keeps them from being accidentally pulled out.

This ended up being a pretty straight forward project with no real problems. I did compromise on the breadboard ends and glued the joint (it was only 9”) and I only allowed the breadboard ends to stay proud about 1/6” on the top. The lower shelf ends are proud by close to 1/8”, but the legs are attached there.

I will be adding an initial to the space between the drawers, I am cutting it on my CNC from Chestnut.

1 comment so far

View yooper's profile


215 posts in 2245 days

#1 posted 02-20-2015 01:48 AM

Very nice work. Thanks for posting. I like both woods.

-- Jeff, CT - keep calm and make sawdust

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics