|Project by kb9jlo||posted 01-22-2015 07:57 PM||1103 views||0 times favorited||7 comments|
This was made from Woodsmith shop “Grandpa’s Toolchest” plans.
I couldn’t cut the miters good enough for my liking so I made finger joints on the top trim and other trim. The panel in the top is 1/8” birch covered with walnut burl on the inside and curly maple veneer on the outside.
The pine was planed and ripped by machine but all the rest was hand work. My first ‘big’ project. Finished in shellac.
-- Dan -- KB9JLO <><