Steak Boards by 45

  • Advertise with us
Project by degoose posted 01-20-2015 09:36 AM 3194 views 5 times favorited 23 comments Add to Favorites Watch

Had an order for 50 steak presentation boards… only a short time to get them done before my surgery..[tomorrow now]
got only 45 done this week… but they have all been delivered and paid for…
The remaining 5 will be sent in a few weeks after I am recuperated…
Several Native Hardwoods used…
Blue Gum
Moreton Bay Ash
Iron Bark
Spotted Gum
Stringy Bark
Crow’s Ash
All are 400 mm by 280 mm and finished with Mineral Oil…
Each has a finger groove routed underneath around the edge… and a juice groove in the top…
Penultimate pic is of some of the rough blanks before being dressed to size…last one is the boards dressed and routed prior to sanding and oiling

-- Drink twice... and don't bother to cut... @ For lovers of all things timber...

23 comments so far

View BobWemm's profile


2031 posts in 1503 days

#1 posted 01-20-2015 09:45 AM

So nice I can almost taste the steaks.
Great job Larry.


-- Bob, Western Australia, The Sun came up this morning, what a great start to the day. Now it's up to me to make it even better. I've cut this piece of wood 4 times and it's still too damn short.

View Sam Shakouri's profile

Sam Shakouri

1200 posts in 2665 days

#2 posted 01-20-2015 09:58 AM

They are very nice. Best wishes and quick recovery for tomorrow.

-- Sam Shakouri / CREATING WONDERS WITH WOOD.....Sydney,Australia....

View nonickswood's profile


541 posts in 1964 days

#3 posted 01-20-2015 10:23 AM

Now thats a stack of Steak Boards they look Great!
Good Luck I hope all goes well, and a speedy recovery.

-- Nick, Virginia,

View Monte Pittman's profile

Monte Pittman

23551 posts in 1915 days

#4 posted 01-20-2015 11:50 AM

Wonderful job.

Hope surgery and healing goes quickly.

-- Mother Nature created it, I just assemble it.

View billb's profile


113 posts in 2522 days

#5 posted 01-20-2015 12:27 PM

Great Job Larry. Good luck and a quick recuperation with your surgery.

-- Bill, Austin, Texas,

View shopdog's profile


576 posts in 3063 days

#6 posted 01-20-2015 01:04 PM

Very nice boards Larry.
Best wishes for a quick recovery

-- Steve--

View woodworm's profile


14287 posts in 3168 days

#7 posted 01-20-2015 01:47 PM

Great job.
Wish you all the best.

-- masrol, kuala lumpur, MY.

View Snookie's profile


172 posts in 2069 days

#8 posted 01-20-2015 02:00 PM

Nice boards, and good luck on your surgery!

-- Snookie, Jasper,GA

View lew's profile


11502 posts in 3332 days

#9 posted 01-20-2015 02:22 PM

Great looking boards, Larry!

Speedy recovery.

-- Lew- Time traveler. Purveyor of the Universe's finest custom rolling pins.

View TopamaxSurvivor's profile


17888 posts in 3253 days

#10 posted 01-20-2015 09:13 PM

Nice work. Good luck with the surgery and wishing you a speedy recovery.

-- Bob in WW ~ "some old things are lovely, warm still with life ... of the forgotten men who made them." - D.H. Lawrence

View Grumpy's profile


21945 posts in 3428 days

#11 posted 01-20-2015 11:17 PM


-- Grumpy - "Always look on the bright side of life"- Monty Python

View eddy's profile


937 posts in 2941 days

#12 posted 01-21-2015 01:48 AM

great work as always
Best wishes for a quick recovery

-- self proclaimed copycat

View Napaman's profile


5519 posts in 3654 days

#13 posted 01-21-2015 02:45 AM

Good luck with your surgery! !! Great boards…

-- Matt--Proud LJ since 2007

View Ron Smith's profile

Ron Smith

162 posts in 3290 days

#14 posted 01-21-2015 02:47 AM

So, what is a steak board, other than beautiful…?

-- Thank God for sawdust... Ron. TX resident...

View Cliff 's profile


1008 posts in 1301 days

#15 posted 01-21-2015 05:09 AM

I agree with Bob. I also can almost taste the steaks….I can even hear them sizzling.

Great work Larry, very well made.

All the best with your surgery and I hope you make a very speedy recovery.

-- Cliff Australia : Snoring is good. It blows away all the Sawdust.

showing 1 through 15 of 23 comments

Have your say...

You must be signed in to post the comments.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics