|Project by Garfman||posted 01-20-2015 04:08 AM||1472 views||1 time favorited||0 comments|
This is a hybrid between several projects including a ShopNotes version.
I was tired of having to reach for a power tool down in a cupboard when I needed it. The many versions of the ABS pipe storage shelf did not say how to mount the pipe to the shelf. I made a jig to accomplish this. Then I inverted to jig to drill holes into the underside of the shelf.
This project was made from excess plywood. The bottom shelf and ends are 3/4”. The top shelf and insides are 3/8”.
I used 3” ABS which is too small for my drills; 4” would be better.
Also you have to layout (and label) where each tool goes. This project helps with workflow which is constant battle in my 10’ x 24’ shop.
-- Fingers are a poor substitute for a push stick.